6-7mm (1/4") US type Stainless Steel Wire Rope Clip/Grip to BS EN 13411-5 - 310.450.006
Details
US type, forged, heavy duty, U-bolt wire rope clip or grip generally in accordance with BS EN 13411-5 (US spec FFC450 Type 1 Class 1) except in A4-AISI 316 stainless steel material.
A unique product offering from TECNI Ltd.
Marine grade 316 stainless steel so very high corrosion resistance.
Polished stainless finish.
Forged U-bolt clips provide a greater rope bearing surface and more consistent strength than cast clips making them ideal for critical applications where assurance of strength, reliability and performance is required.
The broad saddle section of the clip gives superior support to the load bearing section of the wire rope compared with other grip designs.
Their far superior strength means you need less grips per termination than the cast commercial equivalent.
The u-bolt section of the clips have larger thread sizes than cast clips and are designed to take the recommended torque settings, giving you much greater strength and tightening capability.
When fitted and torqued correctly the wire rope clips shall withstand a force of a minimum of 80% of the minimum breaking load of the cable in accordance with the requirements of BS EN 13411-5.
Stamped with the grip size (which indicates the nominal cable diameter for which it is intended), 316 (the stainless steel material grade) and the word FORGED.
Applications & Advice
Applications include suspending static loads and single load lifting operations which have been assessed by a competent person taking into account appropriate safety factors. This includes zip wires, mast stays, catenary systems, ie applications where assurance of strength, reliability and performance is required.
Note they are NOT suitable for use with spiral ropes. Nor does this standard cover U-Bolt wire rope grips as the primary securing devices on mine hoists, crane hoists or eye terminations for slings for general lifting service.
Dimensions
US type, forged, high strength, U-bolt wire rope clip or grip generally in accordance with EN BS 13411-5 (US spec FFC450 Type 1 Class 1) except in A4-AISI 316 stainless steel material for forming eyes in wire rope diameters from 3mm to 13mm. They are ideal for critical applications where assurance of strength, reliability and performance is required.
Item number | Cable Diameters | A | B | C | D | E | G | H | No. of Grips | Torque | |
| Inch | mm | mm | mm | mm | mm | mm | mm | mm | for 80% Cable MBL | (Nm) | |
| 310.450.004 | 1/8 | 3-4 | 5 | 18 | 11 | 12 | 10 | 20 | 23 | 2 | 6.1 |
| 310.450.005 | 3/16 | 5 | 6 | 24 | 14 | 15 | 12 | 23 | 29 | 2 | 10.2 |
| 310.450.006 | 1/4 | 6-7 | 8 | 26 | 15 | 19 | 16 | 30 | 36 | 2 | 20.3 |
| 310.450.008 | 5/16 | 8 | 10 | 35 | 19 | 22 | 18 | 33 | 43 | 3 | 40.7 |
| 310.450.010 | 3/8 | 9-10 | 11 | 38 | 19 | 25 | 23 | 41 | 49 | 3 | 61 |
| 310.450.013 | 1/2 | 12-13 | 13 | 47 | 25 | 30 | 28 | 48 | 58 | 3 | 88 |
