TECNI® Gripper TG1.2 - 12mm Ball Glider for use with up to 1.2mm cable. WLL of 12kg - 170.012.001
TECNI® Gripper TG1.2 - 12mm Ball Glider for use with up to 1.2mm cable. WLL of 12kg - 170.012.001
Product Code
SKU:170.012.001
645 auf Lager
Verfügbarkeit für Abholungen konnte nicht geladen werden
The TECNI® TG1.2 12mm Ball Glider is a compact, polished cable gripper designed for supporting suspended shelving, display systems and other lightweight architectural installations.
Featuring a 12mm diameter spherical body, this discreet fitting provides a neat and professional finish while securely gripping steel wire rope.
Suitable for use with 0.8mm to 1.2mm uncoated steel cable in 7x7 or 7x19 construction, the ball glider is particularly effective in suspended glass shelving systems.
When used in a shelving application, the cable passes vertically through a suitable hole in the shelf, with the ball gripper positioned directly underneath to support it. This creates a clean, minimalist appearance without the need for bulky supporting brackets.
The adjustable cable-gripping mechanism allows the position of the fitting to be set along the cable, making it suitable for single or multi-tier suspension systems.
With a maximum Working Load Limit (WLL) of 12kg when used with the specified 1.2mm TECNI® cable, the TG1.2 Ball Glider is ideal for decorative and commercial suspension applications.
Please note: Cable is sold separately. The appropriate working load depends on the cable diameter and complete suspension system.
Applications & Advice
Applications & Advice
Applications
- Suspended glass shelving systems
- Multi-tier cable-supported shelving
- Retail merchandise displays
- Suspended acrylic and Perspex shelving
- Decorative interior suspension systems
- Lightweight display platforms
- Exhibition and showroom installations
- Cable suspension systems requiring an adjustable support or stop
Suspended Shelving Applications
The TECNI® TG1.2 Ball Glider is particularly suitable for creating discreet, cable-supported shelving systems.
In this type of installation, thin stainless steel cables are suspended vertically from suitable overhead fixing points and passed through appropriately sized holes in the shelves.
The ball gliders are positioned underneath each shelf, where they act as adjustable supports.
The spherical body sits directly beneath the shelf, providing a neat finish while supporting the shelf at the required height.
For multi-tier shelving installations, the cable can continue through the ball glider to the next shelf below, allowing multiple shelves to be supported along the same suspension cable.
Each shelf requires appropriately positioned support fittings, with the quantity and arrangement determined by the shelf dimensions, material and intended loading.
Cable Compatibility
Suitable for TECNI® uncoated steel cable in the following diameters:
- 0.8mm Cable – 6kg WLL
- 1mm Cable – 8kg WLL
- 1.2mm Cable – 12kg WLL
Compatible cable constructions:
- 7x7 Stainless Steel Cable
- 7x19 Stainless Steel Cable
- 7x7 Galvanised Steel Cable
- 7x19 Galvanised Steel Cable
Installation Advice
- Select the appropriate cable diameter for the intended application and working load.
- Install suitable upper suspension attachments into a structurally sound supporting surface.
- Feed the suspension cables vertically through the prepared holes in the shelf.
- Feed the cable through the TG1.2 Ball Glider.
- Position the ball glider directly underneath the shelf.
- Adjust the fitting along the cable until the shelf reaches the required height.
- Ensure all supporting ball gliders are correctly positioned and the shelf is level.
- For multi-tier shelving, continue the cables downwards through the next shelf and repeat the installation process.
- Check that all grippers are securely engaged before applying the intended load.
Important Installation Information
- Suitable for 0.8mm to 1.2mm uncoated steel cable.
- Compatible with 7x7 and 7x19 cable constructions.
- Maximum WLL of 12kg when used with the specified 1.2mm TECNI® cable.
- Cable is sold separately.
- Ensure all cables are correctly inserted and securely retained.
- Ensure the shelf material is suitable for point-supported suspension.
- Glass shelving must be appropriately specified and manufactured with suitable cable holes.
- The working load must account for the weight of the shelf and its contents.
- The complete suspension system must be designed around the lowest-rated component.
- Not rated for lifting.
Technical Info
Technical Info
Brand: TECNI®
Product Code: 170.012.001
Product Type: TG1.2 Ball Glider Cable Gripper
Fitting Style: Spherical / Ball Gripper
Ball Diameter: 12mm
Overall Height: 16mm
Cable Diameter: 0.8mm–1.2mm
Cable Construction: 7x7 or 7x19
Cable Type: Uncoated Steel Wire Rope
Installation Position: Lower / Intermediate
Adjustment: Integrated Adjustable Cable Gripper
Maximum Working Load Limit (WLL): 12kg
Working Load Limits
0.8mm Cable: 6kg WLL
1mm Cable: 8kg WLL
1.2mm Cable: 12kg WLL
Important Technical Information
The TG1.2 Ball Glider incorporates an adjustable cable-gripping mechanism that allows the fitting to be positioned along the suspension cable.
When used for shelving applications, the fitting can act as a support underneath the shelf while allowing the cable to continue to additional suspension points.
The stated Working Load Limits apply to static loads and are valid when used with the specified TECNI® cable.
The complete installation must be assessed to ensure that the ceiling attachment, cable, ball gripper, shelf and supporting structure are suitable for the intended loading.
Not rated for lifting.
Dimensions
Dimensions
Downloads
Downloads
Video
Video


