Type 15 Ceiling Attachment with base plate for use with 1.5mm cable WLL of 25kg - 193.005.333
Type 15 Ceiling Attachment with base plate for use with 1.5mm cable WLL of 25kg - 193.005.333
Product Code
SKU:193.005.333
24個の在庫
受取状況を読み込めませんでした
The Reutlinger Type 15 Ellipse Cable Holder is a precision-engineered fitting designed for securing and positioning steel wire rope in vertical and horizontal cable installations.
Suitable for 1mm to 1.5mm diameter steel wire rope, this versatile fitting features a polished metal finish and an elegant elliptical design, providing a professional appearance for architectural and commercial display applications.
The integrated freewheel mechanism allows the fitting to be positioned and aligned during installation.
Featuring a circular mounting base with two fixing holes, the holder can be secured to a suitable supporting surface. It is designed to work alongside a compatible Reutlinger tensioner to create an adjustable cable system.
Ideal for retail displays, shop fittings, shelving, exhibition installations and decorative wire rope systems.
Applications & Advice
Applications & Advice
Applications
- Retail display and merchandising systems
- Shop fitting installations
- Vertical ceiling-to-floor cable systems
- Horizontal wall-to-wall cable installations
- Exhibition stands and display structures
- Decorative architectural cable installations
- Lightweight shelving and display systems
- Interior cable positioning and support systems
Installation Advice
The Reutlinger Type 15 Ellipse Holder is designed for use with compatible steel wire rope between 1mm and 1.5mm in diameter.
Secure the circular base plate to a suitable load-bearing surface using appropriate fixings.
The cable should be fitted with a suitable stop termination, where required by the manufacturer's installation method, and correctly positioned within the holder.
The freewheel mechanism allows the holder to be aligned during installation.
For adjustable cable tensioning systems, use the holder in conjunction with a compatible Reutlinger Ellipse Tensioner (Part 193.005.330) at the opposite end of the installation.
Important Installation Information
- Ensure the mounting surface and fixings are suitable for the intended load.
- Check cable diameter, construction and material compatibility before installation.
- Do not exceed the applicable working load rating.
- Ensure all cable terminations are correctly installed and compatible with the fitting.
- The complete installation must be assessed, including the cable, end terminations, mounting fixings and supporting structure.
- Not suitable for lifting applications unless specifically approved for the intended use.
Technical Info
Technical Info
COMPATIBLE CABLE OPTIONS & WORKING LOAD LIMITS (WLL)
7x7 Galvanised Steel Wire Rope
1.0mm Diameter – WLL 13kg
1.2mm Diameter – WLL 17kg
1.5mm Diameter – WLL 25kg
7x7 Stainless Steel Wire Rope
1.0mm Diameter – WLL 8kg
1.2mm Diameter – WLL 15kg
1.5mm Diameter – WLL 20kg
MANUFACTURER'S LOAD SPECIFICATIONS
Galvanised Steel Tensile Strength: 2,300 N/mm²
Stainless Steel Tensile Strength: 1,570 N/mm²
Cable Construction: 7x7
Safety Factor: 5:1
IMPORTANT INFORMATION
The working loads shown are the manufacturer's published ratings for the Reutlinger Type 15 cable-holding mechanism.
These ratings have not been independently verified for the complete 193.005.333 fitting and installation.
Working loads depend on cable diameter, construction, material and tensile strength.
The complete installation, including cable terminations, mounting fixings and supporting structures, must be assessed for the intended load.
Not rated for lifting.
Dimensions
Dimensions
Downloads
Downloads
Video
Video

