TECNI® Gripper TG1.5 - 18mm Ball Glider for use with up to 1.5mm cable. WLL of 16kg - 170.015.007
TECNI® Gripper TG1.5 - 18mm Ball Glider for use with up to 1.5mm cable. WLL of 16kg - 170.015.007
Product Code
SKU:170.015.007
1551 auf Lager
Verfügbarkeit für Abholungen konnte nicht geladen werden
The TECNI® TG1.5 18mm Ball Glider is a compact, adjustable cable gripper designed for supporting suspended shelving, retail displays and lightweight architectural suspension systems.
Featuring a polished 18mm spherical body, this fitting provides a discreet and professional finish while securely gripping steel wire rope.
Suitable for use with 1mm to 1.5mm uncoated steel cable in 7x7 or 7x19 construction, the TG1.5 Ball Glider is particularly well suited to suspended glass shelving and decorative display installations.
The ball glider can be positioned directly underneath a shelf, allowing the suspension cable to pass through the shelf while the spherical fitting provides support from below. This creates a clean, modern appearance without the need for traditional shelving brackets.
Its integrated cable-gripping mechanism allows the fitting to be adjusted along the cable, making it suitable for applications requiring precise positioning and alignment.
With a Working Load Limit (WLL) of up to 15kg when used with the specified 1.5mm TECNI® cable, the TG1.5 Ball Glider provides a practical solution for lightweight suspended display systems.
Cable is sold separately. The appropriate Working Load Limit depends on the cable diameter and the complete suspension system.
Applications & Advice
Applications & Advice
Applications
- Suspended glass shelving systems
- Multi-tier cable-supported shelving
- Retail merchandise displays
- Suspended acrylic and Perspex shelving
- Decorative interior suspension systems
- Lightweight display platforms
- Exhibition and showroom installations
- Cable suspension systems requiring an adjustable support or stop
Suspended Shelving Applications
The TECNI® TG1.5 Ball Glider is ideal for creating clean, modern shelving systems using small-diameter steel suspension cables.
In a typical suspended shelving installation, the cable is secured to a suitable overhead attachment and passes vertically through a prepared hole in the shelf.
The ball glider is positioned directly underneath the shelf, where it acts as an adjustable support.
The spherical body provides a neat finish beneath the shelf while allowing the installation height to be adjusted.
For suitable multi-tier shelving systems, the cable can continue downwards through additional shelves, with separate ball gliders positioned beneath each shelf to provide support.
The quantity and positioning of suspension cables and ball gliders must be determined by the shelf dimensions, material and intended loading.
Cable Compatibility
Suitable for TECNI® uncoated steel cable in the following diameters:
- 1mm Cable – 8kg WLL
- 1.2mm Cable – 12kg WLL
- 1.5mm Cable – 15kg WLL
Compatible cable constructions:
- 7x7 Stainless Steel Cable
- 7x19 Stainless Steel Cable
- 7x7 Galvanised Steel Cable
- 7x19 Galvanised Steel Cable
Installation Advice
- Select the appropriate cable diameter for the intended application and working load.
- Install suitable upper suspension attachments into a structurally sound supporting surface.
- Feed the suspension cables vertically through the prepared holes in the shelf.
- Feed the cable through the TG1.5 Ball Glider.
- Position the ball glider directly underneath the shelf.
- Adjust the fitting along the cable until the shelf reaches the required height.
- Ensure all supporting ball gliders are correctly positioned and the shelf is level.
- Where a suitable multi-tier arrangement has been approved, continue the cables through the next shelf and repeat the installation process.
- Check that all grippers are securely engaged before applying the intended load.
Important Installation Information
- Suitable for 1mm to 1.5mm uncoated steel cable.
- Compatible with 7x7 and 7x19 cable constructions.
- Maximum stated WLL of 15kg when used with the specified 1.5mm TECNI® cable.
- Cable is sold separately.
- Ensure all cables are correctly inserted and securely retained.
- Ensure the shelf material is suitable for point-supported suspension.
- Glass shelving must be appropriately specified and manufactured with suitable cable holes.
- The working load must account for the weight of the shelf and its contents.
- The complete suspension system must be designed around the lowest-rated component.
- Do not exceed the specified Working Load Limit.
- Not rated for lifting.
Technical Info
Technical Info
Brand: TECNI®
Product Code: 170.015.007
Product Type: TG1.5 Ball Glider Cable Gripper
Fitting Style: Spherical / Ball Gripper
Ball Diameter: 18mm
Overall Height: 23.5mm
Cable Diameter: 1mm–1.5mm
Cable Construction: 7x7 or 7x19
Cable Type: Uncoated Steel Wire Rope
Installation Position: Lower / Intermediate
Adjustment: Integrated Adjustable Cable Gripper
Maximum WLL: 15kg with specified 1.5mm cable (subject to confirmation)
Working Load Limits
Cable DiameterWorking Load Limit1mm8kg1.2mm12kg1.5mm15kg
Important Technical Information
The TG1.5 Ball Glider incorporates an adjustable cable-gripping mechanism that allows the fitting to be positioned along a suspension cable.
The fitting can be used as an adjustable cable stop or support in suitable suspension applications.
When used for shelving, the ball glider can be positioned beneath the shelf to provide a discreet support point.
Working Load Limits apply to static loads when used with the specified TECNI® cable.
The complete installation must be assessed to ensure the ceiling attachments, cables, ball gliders, shelving material and supporting structure are suitable for the intended loading.
Not rated for lifting.
Dimensions
Dimensions
Downloads
Downloads
Video
Video


