TECNI® Ceiling Attachment CA2 - 2 Part Static Ceiling Attachment for use with 2mm cable 175.020.001
TECNI® Ceiling Attachment CA2 - 2 Part Static Ceiling Attachment for use with 2mm cable 175.020.001
Product Code
SKU:175.020.001
1623 en stock
Impossible de charger la disponibilité du service de retrait
The TECNI® CA2 Two-Part Static Ceiling Attachment is a compact, discreet fitting designed for creating secure and professional wire rope suspension systems.
Suitable for use with 1.2mm to 2mm uncoated steel cable in 7x7 or 7x19 construction, this ceiling attachment provides a neat fixing point for suspended lighting, signage, acoustic panels, artwork and retail display systems.
Featuring a two-part design with a screw cap and mounting base, the attachment allows a cable fitted with a correctly crimped stop ferrule to be securely retained within the fitting.
Its compact design makes it particularly suitable for commercial interiors, galleries, exhibitions and architectural suspension installations where a clean, unobtrusive finish is required.
The fitting has a maximum published Working Load Limit (WLL) of 38kg when used with the specified 2mm TECNI® cable, subject to the suitability of the complete suspension assembly.
Important: This ceiling attachment requires a separate stop ferrule to retain the cable. The cable and stop ferrule are not supplied and must be purchased separately.
Applications & Advice
Applications & Advice
Applications
- Suspended lighting installations
- Retail displays and merchandising systems
- Suspended signage and information panels
- Acoustic panel suspension
- Art gallery and picture display systems
- Carry rail suspension systems
- Exhibition stands and decorative displays
- Architectural and commercial suspension installations
- Multi-point suspension systems, subject to appropriate system design
Cable & Stop Ferrule Requirements
IMPORTANT: This ceiling attachment requires a cable fitted with a correctly crimped stop ferrule.
The cable and stop ferrule are not included with the ceiling attachment and must be purchased separately.
The stop ferrule is secured to the end of the cable and sits inside the ceiling attachment, providing the termination required to retain the cable.
For on-site cable preparation, use a compatible TECNI® stainless steel thin-walled stop ferrule and the TECNI® Bootlace Crimp Tool.
Alternatively, TECNI® can manufacture bespoke cable assemblies to the required length, complete with professionally fitted stop terminations.
Recommended Stop Ferrules
1.2mm Cable
A suitable stop ferrule must be confirmed for the selected 1.2mm cable. Contact TECNI® for advice on the correct termination.
1.5mm Cable
- Stop Ferrule: 1.5mm A4-AISI 316 Stainless Steel Thin Walled Stop
- Product Code: 208.606.015
- Crimp Tool Impression: 6
2mm Cable
- Stop Ferrule: 2mm A4-AISI 316 Stainless Steel Thin Walled Stop
- Product Code: 208.606.020
- Crimp Tool Impression: 6
Recommended Crimping Tool
TECNI® Bootlace Crimp Tool
Product Code: 160.100.510
Designed for crimping compatible stainless steel thin-walled stop ferrules.
The correct crimping impression and pressing procedure must be used for the selected ferrule.
Installation Advice
- Select the correct cable diameter and compatible stop ferrule.
- Pass the cable through the appropriate component of the ceiling attachment before crimping the stop ferrule.
- Position the stop ferrule on the cable end.
- Crimp the ferrule using the compatible TECNI® crimping tool and correct impression.
- Check that the stop ferrule has been correctly pressed and securely retained.
- Secure the ceiling attachment mounting base to a suitable supporting structure using an appropriate fixing.
- Position the crimped cable stop inside the attachment and assemble the screw cap and base.
- Ensure the components are securely assembled and the cable is correctly retained before applying the intended load.
Important Installation Information
- Suitable for 1.2mm to 2mm uncoated steel cable.
- Compatible with 7x7 and 7x19 cable constructions.
- A correctly crimped stop ferrule is required.
- Cable, stop ferrule and crimping tool are sold separately.
- This is a static attachment and does not provide cable height adjustment.
- Ensure the mounting surface and fixings are suitable for the intended load.
- Do not exceed the working load limit of the lowest-rated component.
- Verify the suitability and retention strength of the complete cable assembly.
- Not rated for lifting.
Technical Info
Technical Info
Brand: TECNI®
Product Code: 175.020.001
Product Type: CA2 Two-Part Static Ceiling Attachment
Cable Diameter: 1.2mm–2mm
Cable Construction: 7x7 or 7x19
Cable Type: Uncoated Steel Wire Rope
Installation Position: Upper / Ceiling Attachment
Connection: M6 Internal Thread
Cable Termination: Crimped Stop Ferrule Required
Adjustment: Static – No Integrated Cable Adjustment
Maximum Published WLL: 38kg with 2mm TECNI® cable
Working Load Limits
1.2mm Cable: 12kg WLL
1.5mm Cable: 15kg WLL
2mm Cable: 38kg WLL
Mounting Information
The mounting base can be secured using an appropriate fixing.
The existing product listing references:
- M6 Dual Thread Screw – Product Code: 160.040.060
- Wood Screws – Up to No. 10 (4.76mm diameter)
Important Information
The published working load limits apply to static loads and are valid only when the specified TECNI® cable and compatible suspension components are used.
The strength of the complete suspension system depends on the cable, crimped stop termination, ceiling fixing and supporting structure.
Not rated for lifting.
Dimensions
Dimensions
Downloads
Downloads
Video
Video


