WH-C4 QP Chain hoist - 3mtr HOL

£154.72 GBP

Sale Sold out

Shipping calculated at checkout.

Product Code

SKU:857.025.053

Working Load Limit - tonnes 0.5 1 1.6 2 3.2 5

Quantity

In stock

3mtr Height of Lift

The William Hackett C4 QP Chain Hoist is designed, manufactured and proof load tested in the UK. It incorporates four-pawl mechanical engagement functionality.

The unique and patented pawl design enhances the capabilities of the hoist, allowing all four pawls to engage with the ratchet gear in an offset configuration, enabling finer adjustment and tensioning capability while maintaining pawl/ratchet engagement. This improves the hoist's resilience to failure.

The WH C4 QP is perfect for everyday use, one-off lifts or as part of a fleet. We provide a full range of spare parts and can offer training on safe use and inspection.

Alternative height of lift available on request.

WLL Range:	500kg - 50t
Proof Load Test:	1.5 X WLL
Safety Factor:	4:1
Temp Range:	-20°C to +120°C

Sectors

Applications & Advice

Manual Chain hoists are typically used to lift and lower loads vertically. The top hook is normally suspended by one of William Hackett’s clamps or trolleys which is then attached to a tested beam. The hoist is operated by its hand chain, clockwise to lift and anticlockwise to lower. The reduction gears and mechanical advantage of the hoist means that a single operator can lift the load manually using the hoist without power.

If the load is not vertical to the suspension point, WH C4 QP Chain Hoists have been independently tested and verified to fleet and cross hall up to 45° with no deration in WLL. Chain collectors are available on request to stop the load chain coming into contact with the load.

If headroom is tight and standard trolleys or clamps connected to the WH C4 QP Chain Hoist will not achieve the desired Height of lift, Wiliam Hackett offer combined trolley hoists and ultra-low headroom units to overcome this problem.

William Hackett Chain Hoists are accompanied by a full range of lifting points that can be bolted to the load and connected to the bottom hook, giving a full lifting application from suspension to load.

The WH C4 QP benefits from the patented quad pawl technology making finer tolerance lifts easier and safer, ideal for working in engineering and production, as well as offering a robust braking system everyday hoist.

Pre-use checks and maintenance should always be carried out with a statutory inspection under LOLER every 12 months.

Technical Info

LIGHT LOAD CAPABILITY: tested and certified at 2% of the chain hoist rated capacity.

QUAD PAWL (QP): Endurance tested to twice the industry norm.

SAFETY LATCHES: hooks are fitted with heavy duty cast steel latches. The latch and hook tip are integrated creating a strong and robust hook closure.

HOOK OVERLOAD AND TRACEABILITY MARKS: hooks have overload indicator marks either side of the hook throat (500kg to 10t). Both top and bottom hooks are embossed with a batch code, manufacturer's mark and the working load limit for full traceability and compliance to international standards.

HAND CHAIN JOINER: a unique hand chain joiner is used as a quick and secure method of joining the hand chain.

HOOK HOUSING: secured with socket head cap screws/hex head bolts and nyloc insert locking nuts to allow full inspection.

FLEETING/CROSS HAULING: independently tested (test report 2550-7615) for fleeting or cross hauling applications. Certified to angles up to 60° from the vertical without deration of the WLL.

LOAD CHAIN: fitted with load chain that fully complies with international standard BS EN818-7 Grade T (8).

OVERLOAD LIMITER: available as an option upon request.

MANUFACTURED AND PROOF TESTED in the U.K.