RG-1.5-ST-ESTANTE
RG-1.5-ST-ESTANTE
Product Code
SKU:193.000.146
101 en existencias
No se pudo cargar la disponibilidad de retiro
- Instalación extremadamente rápida
- Reutilizable para proyectos futuros.
- Diseño muy compacto y terminación resistente.
- No se necesitan herramientas especializadas
- ¡Simplemente ajuste y coloque con la mano!
Este accesorio de agarre TECNI® niquelado admite cables de 1 mm a 2 mm. Para instalarlo, simplemente inserte el cable en el émbolo y el cable quedará sujeto por cojinetes de bolas dentro del accesorio para un ajuste infinito. El accesorio es perfecto para aplicaciones de exhibición y suspensión, como mobiliario de tiendas, estanterías, tensado de cables, etc.
nbsp;
nbsp;
Applications & Advice
Applications & Advice
Applications
- Suspended shelving systems
- Retail shop fittings and merchandising displays
- Exhibition stands and display installations
- Adjustable shelf suspension systems
- Interior architectural installations
- Decorative wire rope suspension systems
- Bespoke display and presentation systems
- Commercial display installations
Installation Advice
The Reutlinger Type 15 Bottom B20 Shelf Holder is designed for use with compatible 1mm to 1.5mm steel wire rope.
The fitting is intended for installations where the suspension cable passes through a shelf or display panel.
Position the cable gripper within the prepared installation, ensuring that the flange provides suitable support against the shelf.
Insert the cable through the gripper. The internal ball-bearing mechanism automatically grips the cable when tension is applied.
Adjust the cable to the required position, ensuring that the shelf is level and correctly supported.
For suspended shelving installations, use a suitable number of suspension points to distribute the load evenly.
Important Installation Information
- Use only compatible cable diameters and constructions.
- Ensure the shelf material and installation arrangement are suitable for the intended load.
- Check that the supporting structure and all suspension components are adequately rated.
- Ensure the cable is clean, undamaged and free from deformation.
- Do not exceed the applicable working load limit.
- Do not adjust the gripper while supporting a load.
- The complete suspension system must be assessed for its intended application.
- Not rated for lifting.
Technical Info
Technical Info
WORKING LOAD LIMITS (WLL)
7x7 Galvanised Steel Wire Rope:
1.0mm Cable – WLL 13kg
1.2mm Cable – WLL 17kg
1.5mm Cable – WLL 25kg
7x7 Stainless Steel Wire Rope:
1.0mm Cable – WLL 8kg
1.2mm Cable – WLL 15kg
1.5mm Cable – WLL 20kg
MANUFACTURER'S LOAD SPECIFICATIONS
Galvanised Cable Tensile Strength: 2,300 N/mm²
Stainless Steel Cable Tensile Strength: 1,570 N/mm²
Manufacturer's Safety Factor: 5:1
IMPORTANT INFORMATION
The working loads listed are Reutlinger's published ratings for the Type 15 gripping mechanism when used with the specified wire rope.
Working load limits depend on cable diameter, construction, material and tensile strength.
The complete suspension system, including the cable, gripper, shelf, mounting components and supporting structure, must be assessed for its intended application.
Do not exceed the working load limit of the lowest-rated component.
Not rated for lifting.
Dimensions
Dimensions
Downloads
Downloads
Video
Video

