Type 15 Ceiling Attachment with base plate for use with 1.5mm cable - 193.005.333

• Extremely rapid installation
• Reusable for future projects
• Very compact design & strong termination
• No specialist tools needed
• Simply fit & adjust by hand!

This unique & versatile TECNI®Grip ellipse fitting is designed for supporting 1mm - 1.5mm cables vertically or horizontally. To install, simply insert the cable into the plunger, out though the side exit, then screw onto a flat surface to tension (screws not supplied). The fitting is perfect for display & suspension applications such as shop fittings, shelving, cable tensioning etc.

TECNI®Grip holders are designed to be as strong as the range of cable diameters & constructions that they fit. A 5:1 factor of safety should be applied for all suspension applications & a minimum of two or more holders should be used for each suspension where possible. E.g. 1.5mm 7x7 galvanised cable Minimum Breaking Load (MBL) = 145kgs with a Type 15 TECNI®Grip. The Working Load Limit (WLL) = 145/5 = 29kgs.

A: 40mm
B: 40mm
C: 5mm
D: 5.5mm
E: 14mm