压接钳-TECNI-1-1.5-2-2.5

Ferrule sizes 1.5 and above require two crimping operations with the tool. Crimp 50% of the ferrule and then move the die head along and crimp the remaining 50% of the ferrule. Dies can be reversed to increase crimping force for code 1 ferrules. When pressed using the recommended procedure, copper and aluminium ferrules will hold in excess of 90% of the nominal strength of 7x7 or 7x19 galvanized or stainless steel. It is strongly recommended that each manufactured assembly is proof load tested for any safety critical applications.

Ferrule sizes 1.5 and above require two crimping operations with the tool. Crimp 50% of the ferrule and then move the die head along and crimp the remaining 50% of the ferrule.   

Export Commodity Code 82032000 Files, rasps, pliers (including cutting pliers)   

Length (mm): 245
Width Closed Handles (mm): 70
Head Length (mm): 60
Head Width (mm): 55
Jaw Width: 45

Video