Type 18 M6 Female Threaded Gripper for use with up to 1.8mm cable. WLL of 30kg - 193.000.056
Type 18 M6 Female Threaded Gripper for use with up to 1.8mm cable. WLL of 30kg - 193.000.056
Product Code
SKU:193.000.056
低库存:剩余 2
无法加载取货服务可用情况
- 安装极其快速
- 可供未来项目重复使用
- 非常紧凑的设计和强大的端接能力
- 无需专业工具
- 只需手动安装和调整
这款智能紧凑的 M8 螺纹 1.8 型镀镍 TECNI-Grip 接头可容纳 1.5 毫米、1.8 毫米或 2 毫米电缆。安装时,只需将电缆从侧面出口槽插入柱塞,电缆由接头内的滚珠轴承夹住,可进行无限调节。该接头非常适合悬挂应用,例如灯具、搁架、电缆张紧等。
Applications & Advice
Applications & Advice
Applications
- Suspended lighting and light fittings
- Retail shop fittings and merchandising displays
- Suspended signage and display panels
- Architectural wire rope suspension systems
- Exhibition stands and display installations
- Adjustable cable suspension assemblies
- Decorative ceiling installations
- Commercial interior suspension systems
- Bespoke display and presentation systems
Installation Advice
The Reutlinger Type 18 M6 Female Knurled Cable Gripper is designed for use with compatible 1mm to 1.8mm steel wire rope.
The M6 female-threaded connection allows the fitting to be attached to a compatible male-threaded mounting component.
Secure the gripper to a suitable fixing point, ensuring that the threaded connection is correctly engaged and that the supporting structure is suitable for the intended load.
Insert the cable through the spring-loaded plunger at the top of the gripper and feed it through the internal gripping mechanism until it exits through the side opening.
The internal ball-bearing mechanism automatically grips the cable when tension is applied, allowing the suspension length to be adjusted as required.
The diamond-knurled body provides additional grip when handling and positioning the fitting.
Important Installation Information
- Suitable for compatible 1mm to 1.8mm steel wire rope.
- Ensure the M6 female-threaded connection is securely engaged.
- Ensure the cable is clean, undamaged and free from deformation.
- Use only compatible cable constructions and materials.
- Do not exceed the applicable working load limit.
- Do not adjust the gripper while supporting a load.
- Avoid excessive sideways loading on the gripping mechanism.
- Ensure all mounting components and supporting structures are suitable for the intended application.
- The working load of the complete suspension system must not exceed that of its lowest-rated component.
- Not rated for lifting.
Technical Info
Technical Info
WORKING LOAD LIMITS (WLL)
7x7 Galvanised Steel Wire Rope – 2,300 N/mm²
1.0mm Cable – WLL 13kg
1.2mm Cable – WLL 18kg
1.5mm Cable – WLL 27kg
1.8mm Cable – WLL 30kg
7x7 Stainless Steel Wire Rope – 1,570 N/mm²
1.0mm Cable – WLL 8kg
1.2mm Cable – WLL 15kg
1.5mm Cable – WLL 20kg
1.8mm Cable – WLL 25kg
MANUFACTURER'S LOAD SPECIFICATIONS
Maximum Published WLL: 30kg
Safety Factor: 5:1
IMPORTANT INFORMATION
The working loads listed are Reutlinger's published ratings for the standard Type 18 three-ball gripping mechanism when used with the specified wire rope.
Working load limits depend on cable diameter, construction, material and tensile strength.
The complete suspension system, including the cable gripper, cable, threaded connection, mounting components and supporting structure, must be assessed for its intended application.
Do not exceed the working load limit of the lowest-rated component.
Not rated for lifting.
Dimensions
Dimensions
Dimensions
Downloads
Downloads
Video
Video

